Cleaning The Print Head - Epson AcuLaser CX11N User Manual

3. Gently wipe the pickup roller inside the MP tray with a
moistened cloth.
Caution:
Do not turn the pickup roller; otherwise the CX11N may be damaged.

Cleaning the Print Head

If there are white vertical lines on your printout, you will need
to clean the print head.
1. Pull off the cleaner cover from the right side of the CX11N.
2. Open cover A.
3. Pull forward on the blue lever inside of the CX11N.
4. Grasp the blue cleaner slowly and move it out and in once.
Pickup roller
Note:
Move the cleaner all the way out and in; otherwise, the CX11N
may not be cleaned completely.
5. Push in the blue lever inside the CX11N.
6. Close cover A and replace the cleaner cover.
Cleaning the Exposure Window and
Document Table
If you notice a decrease in print quality, clean the exposure
window. You can use a soft dry cloth to clean the document
table.
8/05
Epson AcuLaser CX11N/CX11NF
Exposure
window
Epson AcuLaser CX11N/CX11NF
Document
table
15
-