Paper Cassette Unit; Placing Originals For Copying And Scanning; Placing Originals On The Document Table - Epson AcuLaser CX11N User Manual

Epson aculaser cx11n: product information
Hide thumbs Also See for AcuLaser CX11N:
Table of Contents

Advertisement

Epson AcuLaser CX11N/CX11NF

Paper Cassette Unit

The optional Paper Cassette Unit can hold the following types
and sizes of paper.
Paper Type
Paper Size
Plain paper
A4, Letter (LT)
Placing Originals for Copying and
Scanning
You can place originals on either the document table or the
Auto Document Feeder (CX11NF only), depending on the
type of the original.
Note:
If you place originals on both the Auto Document Feeder and the
document table, only the documents in the Auto Document Feeder
are scanned.

Placing Originals on the Document Table

Before scanning or copying, make sure the transportation lock
on the left side of the document table is set to the
position. Always keep the document table clean.
1. Open the document cover and place your original face-
down on the glass as shown, in the upper left corner. Move
your original about 0.06 in. (1.5 mm) away from the top
and left edges so all of it will be scanned.
If you plan to scan multiple photographs, position each one
at least 0.8 in. apart from the others.
Note:
The area with a width of maximum 0.06 in. from the horizontal
edge and 0.06 in. from the vertical edge is not scanned.
Caution:
Do not place heavy objects on the document table or press the
glass surface with too much force.
2. Close the document cover gently so that your original does
not move.
Note:
Do not leave photographs on the document table for an extended
period of time as they may stick to the glass.
6
Epson AcuLaser CX11N/CX11NF
-
Capacity
Up to 500 sheets in a cassette
Total stack thickness: 2.2 in.
unlock
Placing Large or Thick Originals (CX11N
Only)
When you scan large or thick originals, you can remove the
document cover. Just open it and pull it straight up.
If you need to press the document flat while you copy or scan
it, do not press too hard and be careful not to move it.
Caution:
Do not use excessive force on the document cover, and do not twist
it diagonally. You may damage the document cover.
When you are done, replace the document cover by inserting
the tabs back into the slots.
Placing Originals in the Auto Document
Feeder (CX11NF Only)
The ADF can hold the following types and sizes of paper.
Paper Type
Plain paper, Recycled
paper
1. Slide the edge guides all the way outward.
2. Arrange your originals so the page you want scanned or
copied first is on the top of the stack.
Note:
Pages are fed from the top and ejected face-down.
3. Insert up to 50 originals short edge first and face-up in the
Auto Document Feeder until it meets resistance. Slide the
edge guides inward against the edges of your originals.
8/05
Paper Size
Capacity
B5, A4, Letter (LT),
Up to 50 sheets (Total
Legal (LGL)
stack thickness: 0.4 in.)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aculaser cx11nf

Table of Contents