Case IH MAXXUM 110 EP Service Manual page 30

Lubrications and Coolant Specifications
Recommended fluids and applications
Recommended engine oil
CASE IH AKCELA UNITEK NO. 1™ SBL CJ-4 SAE
10W-40
CASE IH AKCELA UNITEK NO. 1™ SSL CJ-4 SAE
0W-40
Alternative engine oil
CASE IH AKCELA NO. 1™ ENGINE OIL CJ-4 SAE
15W-40
CASE IH AKCELA NO. 1™ ENGINE OIL CJ-4 SAE
10W-30
Transmission oil, rear axle oil, hydraulic system oil, front
axle (axle and hubs) and front PTO gearbox oil
CASE IH AKCELA HY-TRAN® ULTRACTION
Conventional engine coolant
CNH XHD H D
EAVY UTY
(has to be mixed with 50% of water)
OAT engine coolant
CASE IH AKCELA ACTIFULL OT® EXTENDED LIFE
COOLANT
(If a premixed coolant is not available, mix the concentrate
with 50 % of water)
Brake oil
CASE IH AKCELA LHM FLUID
Air-conditioning compressor oil
Low Viscosity Oil SP10
Grease fittings and bearings
CASE IH AKCELA 251H EP MULTI-PURPOSE GREASE
Regarding filling quantity - see Capacities ().
NOTE: When changing the conventional engine coolant to the CASE IH AKCELA ACTIFULL OT® EXTENDED LIFE
COOLANT or vice versa, follow the "Engine cooling system – Basic instructions" in the operator manual.
C / A -
OOLANT NTI FREEZE
INTRODUCTION
CNH
specification
MAT 3521
MAT 3522
MAT 3540
MAT 3620
MAT 3624
MAT 3630
n/a
MAT 3550
47665854 27/03/2014
21
International
specification
API CJ-4, ACEA E9
API CJ-4, ACEA E9
n/a
Ethylene Glycol
ASTM D 6210
Fully organic technology
ISO 7308
PAG-E13
ISO100 Viscosity
NLGI 2