To Set The Time And Date; To Change The Daylight Saving Time (Summer Time) Setting; Daylight Saving Time; Timekeeping - Casio 5200 Operation Manual

Operation Guide 5200
Switching the Display Screen
Each press of C changes the contents of the digital display.
Date Screen
Day
Seconds Count
Press C.
Day of week
Current Time
C
Screen
E-10

To set the time and date

1. In the Timekeeping Mode, hold down A for about three
seconds. You can release the button after "ADJ"
appears on the display.
• At this time, "12H" (12-hour timekeeping) or "24H" (24-
hour timekeeping) also will be flashing on the display.
• The second hand will move to 12 o'clock and stop
there.
2. Press C to toggle between 12-hour (12H) and 24-hour
(24H) timekeeping.
3. Press B and the city code of the current Home City will
flash on the display.
4. Use C to select the city code you want.
• Make sure you select your Home City code before
changing any other setting.
• For full information on city codes, see the "City Code
Table" at the back of this manual.
E-12
6. When the timekeeping setting you want to change is flashing, use C to change it
as described below.
Screen: To do this:
Toggle between 12-hour (
hour (

) timekeeping

Change the city code
Toggle between Daylight Saving Time (
and Standard Time (
Reset the seconds to
Change the hour and minutes
Change the year, month, or day
E-14
12-hour and 24-hour timekeeping
• With the 12-hour format, the PM indicator (P) appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-16
4. When the setting you want is selected, press A to exit the setting screen.
• The DST indicator appears to indicate that Daylight Saving Time is turned on.
Analog Timekeeping
The analog time of this watch is synchronized with the digital time. The analog time
setting is adjusted automatically whenever you change the digital time.
Note
• The hands for the analog timepiece move to adjust to a new setting whenever any of
the following occurs.
When you change the digital time setting
When you change the Home City code and/or DST setting
• If the analog time does not match the digital time for any reason, use the procedure
described under "To adjust home positions" (page E-42) to match the analog setting
to the digital setting.
• Whenever you need to adjust both the digital and the analog time settings, make
sure you adjust the digital setting first.
• Depending on how much the hands have to move in order to adjust to the digital
time, it may take some time before they stop moving.
E-18
Seconds
C
Hour : Minutes
PM indicator
Do this:
Press C.
) and 24-
)
).
Timekeeping
Read This Before You Set the Time and Date!
This watch is preset with a number of city codes, each of which represents the time
zone where that city is located. When setting the time, it is important that you first
select the correct city code for your Home City (the city where you normally use the
watch). If your location is not included in the preset city codes, select the preset city
code that is in the same time zone as your location.
• Note that all of the times for the World Time Mode city codes (page E-19) are
displayed in accordance with the time and date settings you configure in the
Timekeeping Mode.
5. Press B to move the flashing in the sequence shown below to select the other
settings.
12/24-Hour
DST
City Code
Format
Button
Language
Operation Tone
• The following steps explain how to configure timekeeping settings only.
Screen: To do this:
Toggle the button operation tone between
/
(on) and
Change the language
EN : English DE : German
CN JP
: Chinese : Japanese
7. Press A to exit the setting screen.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A for about three
seconds. You can release the button after "ADJ"
appears on the display.
• At this time, "12H" (12-hour timekeeping) or "24H" (24-
hour timekeeping) also will be flashing on the display.
2. Press B twice to enter the Daylight Saving Time
setting mode.
3. Use C to cycle through the DST settings in the sequence shown below.
DST off ( )
OFF
This setting turns off summer time, and displays the current time normally.
ON
This setting turns on summer time. Turning on summer time advances the current
time by one hour.

World Time

World Time shows the current time in 29 cities (29 time
zones) around the world.
• The times kept in the World Time Mode are
synchronized with the time being kept in the
Timekeeping Mode. If you feel that there is an error in
any World Time Mode time, check to make sure you
have the correct city selected as your Home City. Also
check to make sure that the current time as shown in
the Timekeeping Mode is correct.
• The World Time Mode indicator is displayed in the World
Time Mode.
Current time in
• When you enter the World Time mode, the second hand
selected city
moves to the currently selected World City, and the hour
and minute hands indicate the current time in the Home
City.
E-11
Seconds Hour Minutes
Day Month Year
E-13
Do this:
Press C.
(off)
ES : Spanish
E-15
DST on ( )
E-17
E-19