Microtronics myDatalogEASY IoTmini User Manual page 154

native RS232_3V3_On();
Activates the switchable 3,3V supply voltage VEXT
supply voltage VEXT
Return value
native RS232_3V3_Off();
Deactivates the switchable 3,3V supply voltage VEXT
3,3V supply voltage VEXT
page 61.
Return value
12.3.17 LED
Note: You require the following include file to be able to use the functions in this chapter:
<led>
12.3.17.1 Constants
Selection of whether the two-colour LED is controlled by the firmware or script
Configuration options for the Led_Init() function
LED_MODE_INTERNAL = 0,
LED_MODE_SCRIPT
154
is provided in chapter "Switchable sensor supply VEXTRS232" on page 61.
RS232
OK, if successful
l
< OK, if an error occurs (see "Return codes for general purposes" in
l
chapter "Constants" on page 84)
is provided in chapter "Switchable sensor supply VEXTRS232" on
RS232
OK, if successful
l
< OK, if an error occurs (see "Return codes for general purposes" in
l
chapter "Constants" on page 84)
// controlled by the FW
= 1, // controlled by the script
. Detailed information on the switchable 3,3V
RS232
Explanation
. Detailed information on the switchable
RS232
Explanation
#include
Rev. 01