Microtronics myDatalogEASY IoTmini User Manual page 152

Return value
native DigOut_Close(digout);
Deactivates the isolated switch contact (NO, CC). Detailed information on the isolated switch contact is
provided in chapter "Isolated switch contact (NO, CC)" on page 61.
Parameter
digout
Return value
152
OK, if successful
l
< OK, if an error occurs (see "Return codes for general purposes" in
l
chapter "Constants" on page 84)
Number of the digital output (isolated switch contact); is always 0 for the
myDatalogEASY IoTmini
OK, if successful
l
< OK, if an error occurs (see "Return codes for general purposes" in
l
chapter "Constants" on page 84)
Explanation
Explanation
Explanation
Rev. 01