Table of Contents
Advertisement
Safety
3.4
General safety regulations
The CHP unit may only be used in technically flawless
condition, in accordance with its intended application
and with awareness of all safety-relevant factors.
Incorrect handling may result in personal injury and
material damage.
In the event of any defects or faults being identified
with regard to operational safety or operational
reliability, the CHP unit must be shut down
immediately or not started up in the first place.
DANGER
Incorrect handling of the machine with
regard to operational safety.
Risk to life, serious personal injury
with irreversible damage
► Refrain from all unsafe working
methods.
► Do not carry out any modifications,
additions or alterations to the
machine which may adversely affect
safety.
► Take measures to ensure safe, fully
functional operation.
► Only operate the machine if all
protective and safety equipment is
fully functional.
► Comply with the safety regulations.
ATTENTION
Unauthorised modification to
programmable control systems.
Serious material damage to the
machine and its surroundings
► No unauthorised person is
permitted within the machine's
working area.
► Only qualified, trained personnel
may operate the machine.
VITOBLOC 200 EM-20/39 Operating instructions
●
In the event of any functional faults, shut down the
machine and make it safe. Correct all faults
immediately.
●
Spare parts must meet the technical requirements
stipulated by the manufacturer. This is always
guaranteed in the case of original spare parts.
●
Appropriate workshop equipment is essential for
carrying out the installation work.
●
The location of fire extinguishers and how they are
used must be made known.
●
Observe the fire alarm and firefighting procedures.
ESS Energie Systeme & Service GmbH
9
Advertisement
Table of Contents
