Table of Contents
Advertisement
Operation
5.3.3 Standard screen (level 1)
After switching on, the control unit standard screen
displays the current operating status.
The standard screen represents control level 1.
Fig. 13
Standard screen (level 1)
1
Operating mode display:
Automatik/Aus (Automatic/OFF)
2
Type of operation:
Wärme/Strom/Aus (Heat/Power/OFF)
3
Grid coupling switch feedback:
1 = ON / 0 = OFF
Gen. contactor feedback:
1 = ON / 0 = OFF
5
Display area with current operating data
6
Time display:
hours : minutes : seconds
7
Date display:
date : month : year : day
8
Number of system starts
9
System hours run:
hours : minutes
20
ESS Energie Systeme & Service GmbH
5.3.4 Menu screen (level 2)
This menu screen represents control level 2 and is
displayed when the Menu key (
Items within the display area can be selected by
pressing the arrow keys (
F ig. 11).
Fig. 14
Menu screen (level 2)
When the menu screen appears, the "Modulwerte"
(module parameters) window is already marked for
selection.
Other menu items can be selected using the
UP/DOWN arrow keys.
The "Einstellung" (settings) and "Service" menu items
are intended for the maintenance service and can
only be activated by entering a password.
Operating instructions VITOBLOC 200 EM-20/39
F ig. 11/7) is pressed.
Advertisement
Table of Contents
