Viessmann ESS VITOBLOC 200 Installation & Operating Instructions For Contractors page 12

Chp unit for operation with natural gas
Table of Contents

Advertisement

Safety
3.6.4 Hazards during transportation
DANGER
Suspended loads.
Falling loads can cause death or
serious injury
► Never stand under suspended
loads.
► Observe all transport instructions.
WARNING
Risk of slippage.
Serious personal injury due to
crushing or material damage to the
machine and its surroundings
► Use transport brackets.
► Wear personal protective
equipment (e.g. protective gloves,
safety goggles).
12
ESS Energie Systeme & Service GmbH
3.6.5 Electrical energy/equipment
DANGER
Live components!
Death by electrocution on contact
► Only trained, authorised, specialist
personnel may perform work on the
machine.
► Observe the safety instructions
listed in the machine.
► Isolate the machine from its power
supply before commencing
electrical work.
► Five safety regulations specified in
standard series DIN VDE 0105
must be observed.
ATTENTION
Installation or repair work performed
incorrectly.
Serious material damage to the
machine and its surroundings
► Only have service and repair work
carried out by authorised technical
personnel.
► Only use the original components
permitted by the manufacturer.
► Observe all safety and hazard
warnings.
Only equip and operate the machine with products
permitted by the manufacturer.
Only use original fuses/MCBs with the prescribed
current strengths. Shut down the machine
immediately in the event of faults in the power
supply.
Observe all safety and hazard warnings on the
electrical equipment.
Installation work on electrical equipment or
operating materials may only be carried out by an
electrician or trained personnel under the
supervision and guidance of an electrician, in
accordance with the electrical regulations.
All work on live parts is prohibited.
Operating instructions VITOBLOC 200 EM-20/39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ess em-20/39

Table of Contents