Temperature Setback Delay - Heat - Friedrich EMRT2 Instruction Manual

Custom Energy Savings Settings
12 – TEMPERATURE SETBACK DELAY - HEAT
00-120
for which the room that is in the guest occupancy mode needs to be
unoccupied before the temperature setback is initiated.
This feature prevents initiating temperature setback prematurely while
the guest is still in the room but in an area where occupancy cannot
be detected by the occupancy sensor.
Setting the "Temperature Setback Delay - Heat" to "00", disables the
setback in the heat mode. Set to "00" to disable EMS.
30
(20* default setting) Select the time delay (in minutes)