How To Use The Test Tool; Test Tool Power - Fluke ScopeMeter 190 Series III User Manual

190 Series III
Users Manual
Table 2 is a list of the included accessories that are specific to the MDA-550-III.
Item
Set of 3 brushes

Probe holder with 2 extension rods

Magnetic base


How to Use the Test Tool

This section provides a step-by-step introduction to the scope and meter functions of the test
tool. The introduction does not cover all of the capabilities of the functions but gives basic
examples to show how to use the menus and perform basic operations.

Test Tool Power

See Figure 1 to power the test tool from a standard ac outlet. See
using battery power.
Turn on the test tool with
The test tool powers up in the last setup configuration.
The menus to adjust date, time, and information language are switched on automatically when
the test tool is powered on for the first time.
6
sales@GlobalTestSupply.com
Table 2. MDA-550-III Accessories
1
O
.
Fluke-Direct
2 3
Description
Battery Life for instructions on
.com
1.888.610.7664