Delete Screens With Associated Setups; Recall Screens With Associated Setups - Fluke ScopeMeter 190 Series III User Manual

The file is saved using a fixed name (IMAGE) and a serial number, for example IMAGE004.bmp.
If no free memory locations are available a message pops up that proposes to you to overwrite
the oldest data set:
• If you do not want to overwrite the oldest data set, press 3, then delete one or more
memory locations, and save again.
If you want to overwrite the oldest data set, press 4.
•

Delete Screens with Associated Setups

To delete a screen and associated setup:
S
1. Press
2. Press 4 to open the FILE OPTIONS menu.
3. Press 1 to select the source as internal memory (INT) or a USB device.
h i
4. Use
5. Press E to accept the choice and jump to the filename field.
h i
6. Use
7. Press E to delete the selected files.

Recall Screens with Associated Setups

To recall a Screen+Setup:
S
1. Press
2. Press 2 to open the RECALL menu.
3. Press 1 to select the source as internal memory (INT) or a USB device.
h i
4. Use
5. Press E to accept your choice and jump to the filename field.
h i
6. Use
7. Press E to recall the selected Screen+Setup.
Observe that the recalled waveform is on the display and that HOLD appears on the screen.
From this point you can use cursors and zoom for analysis or you can print the recalled
screen.
To recall a screen as a reference waveform to compare it to an actually measured waveform, see
Waveform
sales@GlobalTestSupply.com
to show the SAVE key labels.
to highlight DELETE.
to select the file to be deleted or 2 to select all files for deletion.
to show the SAVE key labels.
to highlight DATA.
to select the file to be recalled.
Comparisons.
Fluke-Direct
®
ScopeMeter Test Tool
Memory and PC
.com
1.888.610.7664
55