Roamabout R1 Print Server; Installing The Roamabout R1 Print Server; Configuring The Roamabout R1 Print Server; Windows 95/98/Nt - Enterasys R1 SOHO Setup And Installation Manual

Enterasys roamabout r1 soho access point: install guide
Hide thumbs Also See for R1 SOHO:
Table of Contents

Advertisement

RoamAbout R1 Print Server

Use the RoamAbout R1's built-in print server to connect your printer to the RoamAbout
R1, and to print from any computer on your network. Each computer must have a print
client installed to communicate with the RoamAbout R1's print server.
If you are running Windows 95, 98 or NT, you must install the RoamAbout R1
Printer Server program and then configure it.
Windows 2000/Me and Macintosh operating systems have a print
NOTE
client already installed. You do not need to install the RoamAbout R1
print server. However, you must configure the print client.

Installing the RoamAbout R1 Print Server

You must install the RoamAbout Print Server on Windows 95/98 and Windows NT
operating systems to print to the printer attached to the RoamAbout R1.
Perform the following steps to install the RoamAbout R1 print server:
1.
Insert the Installation CD into your CD-ROM drive. Auto Run start the installation
procedure.
If Auto Run does not start, click Start and Run... in the task bar. Type D:\Setup
(where D is your CD-ROM drive) and click OK.
2.
InstallShield guides you through the installation process.
3.
Click Next for each window, to accept the defaults, and Finish when complete.
4.
Windows must reboot for the changes to take place. When prompted to reboot, select
Yes and click OK. The default installation path is
C:\Programs\RoamAbout\RoamAbout R1 Print Server.The directory contains an
uninstall program, if you ever want to uninstall it.

Configuring the RoamAbout R1 Print Server

After the RoamAbout R1 print server is installed, it must be configured to work properly.
Refer to the section that lists your operating system for instructions.

Windows 95/98/NT

1.
Click Start, click Settings, and then select Printers.
2.
Double-click on Add Printer.
3.
Follow the screen prompts to add your printer as a Local printer for Windows 95/98
or as a printer managed by My Computer for Windows NT.
4.
Select the printer you have attached to the RoamAbout R1 from the list of
manufacturers and printers.
4-8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roamabout r1

Table of Contents