Configure Network Settings Using The Control Panel - Brother DCP-J1200W Online User's Manual

Home > Network > Configure Network Settings

Configure Network Settings Using the Control Panel

To configure the machine for your network, use the control panel buttons.
Network Settings
Function
Enable the One Push Method of Wi-Fi
™
Protected Setup (WPS).
Enable the PIN Method of Wi-Fi Protected
™
Setup (WPS).
Enter Wi-Fi Mode.
Set Wireless Direct to On.
Print the Wireless Direct Information Sheet.
Print the Network Configuration Report Sheet.
Restart Wi-Fi and Wireless Direct. Use this
function to solve wireless network problems.
Wi-Fi Mode
Function
Print the WLAN Report.
Enable or disable Wireless Direct.
Enable or disable Wi-Fi.
Reset the Network settings.
Related Information
• Configure Network Settings
> Configure Network Settings Using the Control Panel
Button 1 Button 2
-
(Wi-Fi)
-
(Wi-Fi)
(Wi-Fi) (STOP)
(Wi-Fi) (Paper)
MONO COPY
(Wi-Fi)
COLOUR
(Wi-Fi)
COPY
Button
(Wi-Fi)
(Paper)
MONO COPY
COLOUR COPY
Instructions
Press the button three times.
Press the button five times.
Press the buttons
simultaneously.
Press the buttons
simultaneously.
Press the buttons
simultaneously.
Press the buttons
simultaneously.
Instructions
Press the button once.
Press the button once.
Press the button once.
Press and hold the button for
two seconds.
102