Home >
Network
>
Configure Network Settings
Configure Network Settings Using the Control Panel
Related Models: DCP-T420W/DCP-T425W
To configure the machine for your network, use the control panel buttons.
Network Settings
Function
Enable the One Push Method of Wi-Fi
™
Protected Setup
(WPS).
Enable the PIN Method of Wi-Fi Protected
™
Setup
(WPS).
Enter Wi-Fi Mode.
Set Wireless Direct to On.
Print the Wireless Direct Information Sheet.
Print the Network Configuration Report Sheet.
Restart Wi-Fi and Wireless Direct. Use this
function to solve wireless network problems.
Wi-Fi Mode
Function
Print the WLAN Report.
Enable or disable Wireless Direct.
Enable or disable Wi-Fi.
Reset the Network settings.
Related Information
•
Configure Network Settings
> Configure Network Settings Using the Control Panel
Button 1
Button 2
WiFi
-
Button/LED
WiFi
-
Button/LED
WiFi
Button/LED
WiFi
Copy Shortcut
Button/LED
WiFi
Mono Start
Button/LED
WiFi
Colour Start
Button/LED
Button
WiFi Button/LED
Copy Shortcut
Mono Start
Colour Start
Instructions
Press the button three times.
Press the button five times.
Press the buttons
simultaneously.
Press the buttons
simultaneously.
Press the buttons
simultaneously.
Press the buttons
simultaneously.
Instructions
Press the button once.
Press the button once.
Press the button once.
Press and hold the button for
two seconds.
108