Led Patterns And Indications - Brother DCP-J1200W Online User's Manual

Home > Introduction to Your Machine

LED Patterns and Indications

The LEDs on your machine's control panel light up or blink to indicate machine status.
LED
LED
(Lit)
(Blinking)
(Blinking alternately)
(Blinking slowly and
faintly)
Related Information
• Introduction to Your Machine
Related Topics:
• Error and Maintenance LED Indications
> LED Patterns and Indications
Status
Standby
Busy
Warming Up (Low Temperature)
Cooling Down (High Temperature)
Data Remaining
Job Cancelled
Sleep
Description
The LED is off.
The LED is lit.
The LED is blinking.
The LED is blinking slowly and faintly.
Description
The machine is ready to print.
The machine is processing a print job.
The machine is warming up.
The machine is cooling down.
There is print data in the machine's memory. To
cancel the job and clear it from machine memory,
press (STOP).
The machine is cancelling the print job.
In Sleep mode (Power Save mode), the machine
acts as if it is turned off, but it can still receive data.
When you send a print job, the machine wakes up.
11