Faq; Troubleshooting - Panasonic Lamdash ES‑BST6Q Operating Instructions Manual

FAQ

Question
Will the battery deteriorate
if not used for an
extended period of time?
Can I charge the shaver
after every use?
Why should the adaptor
be disconnected after
charge?
What is the constituent of
the dedicated oil?
Why does the appliance
beep twice after switched
off?
Answer
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
The battery used is a lithium‑ion,
so charging after every use will
have no effect on battery life.
Charging the battery for more than
1 hour will not affect battery
performance, but disconnect the
adaptor for safety and to save
energy.
Constituent of the oil is liquid paraffin.
The sound indicates that the
battery capacity is running low.
Please charge the appliance.

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
Problem
The power switch does
not turn ON.
The power will not switch
ES-BST6Q
to OFF.
The shaving sensor does
not respond.
Action
Unlock the switch lock.
(See page 14.)
Press the power switch twice
while using in shaving foam mode.
Depending on the beard
thickness or the amount of beard
trimmings in the shaver head, the
shaving sensor may not react and
the driving sound may not
change. This is not abnormal.
The shaving sensor may not
respond depending on the type
and quantity of the shaving gel.
This is not abnormal.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 15.)
The shaving sensor may not
respond when there is not enough
oil on the blades.
17