Panasonic Lamdash ES‑BST6Q Operating Instructions Manual page 15

▼
To remove light dirt
4. Slide the cleaning shutter
until it clicks.
5. Clean the outer foil section
with running water.
6. Turn the shaver off.
• Rinse with water and
shake up and down
several times to remove
the water.
▼
▼
To remove heavy dirt
4. Turn the shaver off after
10 – 20 seconds.
5. Remove the outer foil section
and turn the shaver on.
6. Clean the shaver and the
outer foil section with
running water.
• Rinse with water and
shake up and down
several times to remove
the water.
▼
▼
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the shaver,
and the trimmer completely.
• Allow the shaver to dry in the shade,
avoid direct sunlight.
9. Lubricate the shaver.
It will keep the movement of the blade
smooth and maintain a comfort shave.
1. Apply one drop of oil to each of the
system outer foils.
2. Raise the trimmer and apply a
drop of oil.
3. Switch the shaver on, and run it for
approximately five seconds.
4. Switch off the shaver, and wipe off
any excess oil from the system
outer foil with a soft cloth.
► Notes
• Do not use any kitchen or bathroom detergents other than hand
soap.
Doing so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration of
the parts.
Wipe with diluted soapy water.
• Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
▼
15