Replacing The System Outer Foil And The Inner Blades - Panasonic Lamdash ES‑BST6Q Operating Instructions Manual

Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
Do not use any brush other than the supplied one.
► Cleaning with the long brush
Clean the outer foil section, system
outer foil, the shaver body and the
trimmer using the long brush.
► Cleaning with the short brush
• Clean the inner blades using the short
brush by moving it in direction as illustrated.
• Do not move the short brush
perpendicularly against the blades as it
will damage the inner blades and affect
their sharpness.
Replacing the system outer foil and
the inner blades
system outer foil once every year
inner blades once every two years
► Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
16
► Attaching the outer foil section
After turning the water inlet surface to the front,
securely attach the outer foil section to the shaver
until it clicks.
► Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
• Do not press the system outer foil
release buttons with excessive force.
Doing so may bend the system outer foil,
preventing complete attachment to the
foil frame.
2. Align the water inlet surface and the
system outer foil mark ( ) and securely
attach together until it clicks.
► Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
► Note
Do not throw away the foil frame.
►Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑BST6Q/ES‑BST2Q
System outer foil WES9087
Inner blades WES9068