Care And Maintenance - La Crosse Technology WS9090 Instruction Manual

Note:
Before permanently fixing the transmitter wall base, place all units in the desired
locations to check that the outdoor temperature reading is receivable. In event that
the signal is not received, relocate the transmitters or move them slightly as this may
help the signal reception.

CARE AND MAINTENANCE:


Extreme temperatures, vibration and shock should be avoided as these may
cause damage to the unit and give inaccurate forecasts and readings.

Precautions shall be taken when handling the batteries. Injuries, burns, or
property damage may be resulted if the batteries are in contact with
conducting materials, heat, corrosive materials or explosives. The batteries
shall be taken out from the unit before the product is to be stored for a long
period of time.

Immediately remove all low powered batteries to avoid leakage and damage.
Replace only with new batteries of the recommended type.

When cleaning the display and casings, use a soft damp cloth only. Do not
use solvents or scouring agents as they may mark the LCD and casings.

Do not submerge the unit in water.

Special care shall be taken when handling a damaged LCD display. The liquid
crystals can be harmful to user's health.

Do not make any repair attempts to the unit. Return them to their original point
of purchase for repair by a qualified engineer. Opening and tampering with
the unit may invalidate their guarantee.

Never touch the exposed electronic circuit of the device as there is a danger
of electric shock should it become exposed.
40