Chapter 3 Connecting To The Network; Connecting A Twisted Pair Segment - Cabletron Systems EMC39-12 User Manual

CONNECTING TO THE NETWORK
This chapter outlines the procedure for connecting the EMC39-12 to your
network.
3.1

CONNECTING A TWISTED PAIR SEGMENT

The rear panel of the EMC39-12 has a 50-pin Champ connector. The
configuration outlined in this section explains how to attach a twisted pair
cable to the EMC39-12 and to a 10BASE-T compliant Ethernet device
that has a 50-pin Champ connector (e.g., Cabletron Systems ELM or
TPRMIM).
The EMC39-12 may also be connected to a punchdown block with a
50-pin feeder cable. The Champ connector supports twelve 10BASE-T
twisted pair segments.
Refer to Appendix B for information about wiring the EMC39-12
NOTE
to a punchdown block.
EMC39-12 User's Guide
CHAPTER 3
3-1