Table of Contents
Advertisement
3. With the rackmount brackets installed, position the EMC39-12
between the vertical frame members of the 19-inch rack and fasten it
securely with mounting screws as shown in Figure 2-4.
TPLINK
XMT
RCV
PWR
FOLNK
Figure 2-4 Installing the EMC39-12 in a Rack
2.4
CONNECTING THE EMC39-12 TO THE POWER
SOURCE
The EMC39-12 has a power supply with automatic voltage
NOTE
sensing that allows connection to power sources ranging from
100–125 Vac or 200–240 Vac, 50/60 Hz.
To connect the EMC39-12 to the power source:
1. Plug the power cord into the back panel of the EMC39-12.
2. Plug the other end of the power cord into a grounded wall outlet.
3. Verify that the PWR LED is on; this indicates that the EMC39-12 is
receiving power.
EMC39-12 User's Guide
Connecting the EMC39-12 to the Power Source
19-Inch Rack
EMC39-12
Ethernet Media Converter
RX TX
RX TX
12
11
12 11 10 9 8 7 6 5 4 3 2 1
Screws (4)
LANVIEW
WITH
RX TX
RX TX
RX TX
RX TX
RX TX
RX TX
10
9
8
7
6
RX TX
RX TX
RX TX
RX TX
5
4
3
2
1
1854-06
2-5
Advertisement
Table of Contents
