Table of Contents
Advertisement
2.3.2
Rackmount Installation
To install the EMC39-12 in a 19-inch rack, Cabletron Systems includes
an accessory kit containing the rackmount brackets, mounting screws, and
a strain-relief bracket for cable management.
Before installing the EMC39-12 into a rack, ensure that the rack
supports the device(s) without compromising the stability of the
WARNING
rack. Otherwise, personal injury and/or equipment damage
may result.
Attaching the Strain-Relief Bracket
Attach the strain-relief bracket to the front of the EMC39-12 as follows:
1. Locate the strain-relief bracket and four 8-32 x 3/8-inch pan-head
screws in the rackmount kit.
Do not attempt to attach the strain-relief bracket with screws
other than the 8-32 x 3/8-inch screws included with the
EMC39-12. Use of longer screws may damage the unit or
cause electrical shock.
2. Attach the strain-relief bracket to the bottom of the EMC39-12 using
the four 8-32 x 3/8-inch pan-head screws (Figure 2-2).
1
2
3
TX
RX
TX
RX
TX
RX
Figure 2-2 Attaching the Strain-Relief Bracket
EMC39-12 User's Guide
Screws (4)
Strain-Relief Bracket
4
5
6
7
8
9
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
LANVIEW
Converter
WITH
Installing the EMC39-12
10
11
12
1
2
3
4
5
6
7
8
9
10
TX
RX
TX
RX
TX
RX
Media
Ethernet
EMC39-12
11
12
FOLNK
PWR
RCV
XMT
TPLINK
1854-04
2-3
Advertisement
Table of Contents
