Connecting The Emc39-12 To The Power Source - Cabletron Systems EMC39-12 User Manual

Chapter 2: Installation
2.3 CONNECTING THE EMC39-12 TO THE POWER
SOURCE
The EMC39-12 has a universal power supply. This allows you to
connect the EMC39-12 to power sources from 100 Vac to 125 Vac,
NOTE
50-60 Hz or 200 Vac to 240 Vac, 50-60 Hz
To connect the EMC39-12 to the power source:
1. Plug the power cord into the back panel of the EMC39-12.
2. Plug the other end of the power cord into a grounded wall outlet.
3. Verify that the PWR LED is on; this indicates that the EMC39-12 is
receiving power.
Page 2-4 EMC39-12 User's Guide