V-fit AL16/1CE Assembly & User Manual page 20

Fit the Handlebar Bushings (72) and M19 Wave Washers (71) onto each side of
5
Handlebar Upright Pivot Bars first. Now fit the Dual Action Handlebar-Upper
(68L/68R) and secure in place using 1 x M8 x 20mm Hex Bolt (14), 1 x M8
Spring Washer (26), 1x M8 Flat Washer (16) and 1 x D-Flat Washer(66) for
each side as shown below. Fit the correct labelled (L or R) Dual Action
Handlebar –Upper (68L/68R) into the appropriate Dual Action Handlebar-Lower
(64L/64R) and secure in place using 4 x M8 x 40mm Hex Bolts (65), 4 x M8
Curved Washers (27), 4 x M8 Spring Washers (26) and 4 x M8 Dome Nuts (25).
6
Attach the Fixed Handlebar (81) to the Handlebar Upright (73) using
2 x M8 x 30mm Allen Bolts (77), 2 x M8 Spring Washers (26) and 2 x M8
Curved Washers (27).
Page 20
Assembly