Table of Contents
Advertisement
Battery Requirements:
A fully charged battery and good connections are
essential to the proper operation of your winch. The
minimum
requirement
for
a
12
volt
automotive
DC battery is 650 Cold Cranking Amps. Ask your
Quadratec
sales
representative
for
details
about
heavy-duty batteries and terminals for your vehicle.
General Maintenance:
All moving parts within the winch have been lubricated at
the factory using high temperature lithium grease. No
internal lubrication is required. With safety gloves on,
periodically lubricate the steel cable assembly using light
penetrating oil.
Check battery cables and electrical connections at regular
3 month intervals to be certain they are clean and tight at
all connection points.
Inspect your wire rope before and after each winching
operation. When damaged, replace with the size specified
in the Replacement Parts List. The wire rope must always
spool onto the drum as indicated by the drum rotation
decal on the winch.
21
Advertisement
Table of Contents
