F) Installation On A Work Top; G) Installation - Brandt SM2006B Instruction Manual

f) Installation on a Work Top
Remove the packaging and put the accessories aside.
Check that the oven is not damaged, e.g. showing signs of impacts or has a broken door. Do
not install the oven if it is damaged.
Bodywork: Remove the protective film from the surface of the microwave oven bodywork.
Do not remove the light brown Mica coating which is found in the cavity of the oven
and which protects the magnetron.

g) Installation

1. This product must not be built in.
In order to provide your microwave oven with optimum ventilation fix the plastic part supplied
with these instructions in the hole provided at the rear of your machine (Fig. 2). Then place
your machine against the wall; the plastic part ensures the correct distance for good
ventilation.
Leave at least 30 cm of free space above the oven, 7.5 cm on the left-hand side and leave the
right-hand side open (Fig. 1).
Do not take the feet off the oven.
Do not obstruct the air vents as you risk early damage to your machine.
Fig 1
Fig 2
2. Electrical Connection
• Your installation is fitted with 16 ampere heat protection.
• It is essential to use a socket with an earthing terminal connected in compliance with
the safety standards in force.
1. 7.5 cm
2. 30 cm
3. Open
30