Nb Fan Set Installation; Pwm Fan Set Installation - Abit IX48 GT3 User Manual

1.6.4 NB Fan Set installation

It is the default package that the NB heatsink not installed with a cooling fan. Enclosed in the
motherboard package you can find a fan set specially designed for this heatsink. Please have it
installed on top of the heatsink.
Don't forget to connect the fan power plug to [SYSFAN1] connector after installation.

1.6.5 PWM Fan Set installation

(40 x 40 x 10mm, not included in this motherboard
It is possible to attach one mini cooling fan
package)
on top of the PWM heatsink to increase the heat dissipating efficiency.
Enclosed in the motherboard package you can find a pair of retention clips. This bundled
accessory is used to hold the fan itself.
Don't forget to connect the fan power plug to [AUXFAN4] connector after installation.
IX48 GT3 1-9