Power Supply - Tanita WB-800AS plus Instruction Manual

When using the stand
When installing the display box on the wall
1) Attach bracket to wall using included screws.
C adapter
C adapter is more preferable when the scale will be used continuously.
Batteries
Please pull out the stand at the back of the display box.
When putting away the display box, please insert the stand in the slot on the back of
the display box.

6. Power supply

<Back side>
1) Pull up the battery case which is located on top of display.
2) Ensure that the batteries are inserted with correct polarity.
3) Push down the battery case completely.
4) Unplug the AC adapter jack on the back of the display box.
* Insert new batteries such that the negative terminals of the batteries are pushed up against the
coils within the battery housing.
Caution
Unplug the AC adapter jack, or the scale won't work.
2) Slide display unit onto bracket.
Plug in the AC adapter. Insert the AC adapter jack into the DC
Jack on the back of the display box.
en
9