Table of Contents
Advertisement
5.2 Security
Mode:
The Security page displays the current system mode indicated by the 3 mode buttons. The current mode button
is highlighted. To change modes, press the respective mode button and enter your User PIN Code.
Sensors:
To view the security sensors in the system, press the "SENSORS" bar to pull up the sensor list. The sensor informa-
tion will be displayed, including fault status and Door Contact Open/Close conditions. PIR Camera and IP Cam-
era can be activated by pressing the camera button.
5.3 Automation
The Automation page provides available Home Automation devices and scenes.
Device List:
Available Home Automation devices are displayed along with their information and condition. Depending on
the device function, you may control the device on this page or access extra device functions by selecting the
device.
Filter:
Select Filer to narrow down the device list you want to display. If you have programmed Home Automation
Group using the Web Browser interface, the programmed group will also be available for selection.
30
Advertisement
Table of Contents
Troubleshooting
