Table of Contents
Advertisement
4.4 Scene
The Scene subpage allows you to configure Home Automation Scenes. A Scene includes a set of reactions
which the system may perform automatically and simultaneously through its Home Automation devices.
For example, the burglar alarm may activate a Smart Home plug, which in turn turns on the light and
simultaneously lets the PIR Camera take a picture. System conditions and/or time schedules can be integrated
in a Scene. The Control Panel will then execute the Scene automatically when the condition or time schedule
requirement is met, or the user can also manually execute the scene via the scene page.
NOTICE:
Sensors, like Door Contacts or Motion Detectors, can also activate other sensors, for example IP Cameras, PIR Cameras or Power
Switches that switch on lights (see Chapter 4.8.1 Device Settings). You can do this by triggering a scene as a response to a sensors
activation. Under Setting/Device, you find the section "Trigger Response". Here you can assign a specific Scene to each Device.
11
Advertisement
Table of Contents
Troubleshooting
