9. Remove seven screws.
10. Extract the feed roller axis by pushing
the joint part.
11. Remove the DU assy to the front.
12. Remove the screw.
13. Pull two connectors out and then
remove the high voltage PWB.
14. Check or replace the high voltage PWB
and refit all the removed parts.
Screw
Screw
Screw
Screws
DU assy
Screws
Screw
Connector
High voltage PWB
1-5-27
Joint part
Figure 1-5-43
Connector
Figure 1-5-44
Paper feed
roller axis