Cadillac 2006 Escalade Owner's Manual page 14

Each front head restraint can also be tilted forward to
four positions by pulling on it.
A click will sound after each tilt position is reached.
Pull the head restraint forward, past the last position, to
release it to the upright position.
The rear seat head restraints are also adjustable up and
down, but they do not tilt.
Rear Seats
Rear Seat Operation
Entering or Exiting the Third Row
Seats
Regular Models
If your vehicle has the 60/40 Split Bench seat in the
second row, you must flip and fold the second row seat
following the instructions later in this section. See
60/40 Split Bench Seat (Second Row) on page 1-11. To
exit the third row seat with no assistance, do the
following:
1-8
2. Next, push the seatback forward until it is flat with
the floor.
CAUTION:
{
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.
Return the seat to the normal seating position when
finished. Push and pull on the seatback to make sure it
is locked in place.
1. Reach over the second
row seat and pull up on
the strap loop located
in the center of the
seat where the
seatback and the seat
cushion meet. Then
pull the seat cushion up
and push it forward.