Kohler STERLING 547909-59S-G05 Installation Instructions Manual page 8

4. Prepare the Wall Jambs
IMPORTANT! The wall jamb must fit tightly against the threshold and wall.
Position the wall jamb on the threshold, against the wall, with the bumper pointing into the shower.
If needed, shape and file the bottom corner to fit against the shower wall. Use a coin to match and transfer the corner
radius.
Plumb the wall jamb.
Tape the wall jamb securely in place and mark its location.
Repeat for the second wall jamb.
Make sure the threshold is still parallel with the front of the shower base/bath ledge.
1417143-2-B
Wall Jamb
Bumper
8 Sterling