Kohler STERLING 547909-59S-G05 Installation Instructions Manual page 22

18. Adjust the Rollers
NOTE: The rollers may require adjustment if a panel does not move, makes a scraping sound when moved, or if an upper
or lower bumper does not make contact when closed.
Adjust the alignment of each end of the panel by loosening the screws and turning the adjustment clamp.
When adjusting the outside panel, hold the clip cover straight or insert a wood shim under the cover while securely
tightening the screws so the clip does not scrape in its track.
Repeat until the door operates smoothly and aligns evenly with the shower walls.
Confirm the clips are still oriented correctly (see the "Confirm Correct Installation" section). Securely tighten the
screws.
1417143-2-B
Clamp
Screw
Shim
Inside
Roller
22
Outside
Clip
Roller
Header
Sterling