Kohler STERLING 547909-59S-G05 Installation Instructions Manual page 6

2. Measure and Cut the Threshold
A
11/16"
(17 mm)
WARNING: Risk of serious injury. Always wear safety glasses while cutting and drilling.
Use a drop cloth to protect the shower surface.
Measure distance "A" between the shower walls and mark it on the threshold.
Measure 11/16" (17 mm) from "A" and make a second mark on the threshold, as shown.
Cut the threshold at the second mark and file any rough edges.
IMPORTANT! The seal must be installed with at least 1/2" (13 mm) extending beyond each end of the threshold. The seal
will be cut to fit after the threshold has been installed.
Press the seal into the channel in the threshold, leaving approximately 1/2" (13 mm) extending beyond the end of the
threshold.
1417143-2-B
11/16"
(17 mm)
A
Cut
here.
6
A
Seal
1/2" (13 mm)
Sterling