Avantco TUC60R User Manual

Avantco TUC60R User Manual

Commercial refrigerator and freezer

Advertisement

Quick Links

Commercial Refrigerator
And Freezer User's Manual
Refrigerated Pizza Prep Units
PICL1, PICL2, PICL3
Refrigerated Sandwich Prep Units
SCL1, SCL2, SCL236, SCL260, SCL3,
SCLM1, SCLM2, SCLM236, SCLM260, SCLM3
Undercounter Refrigerators and Freezers
TUC27R, TUC27F, TUC48R, TUC48F, TUC60R, TUC72R
Worktop Refrigerators and Freezers with Backsplash
TWT27R, TWT27F, TWT48R, TWT48F, TWT60R, TWT72R
Please read the manual thoroughly prior to equipment set-up,
operation and maintenance.
User Manual
- 1 -
01/2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TUC60R and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Avantco TUC60R

  • Page 1 SCL1, SCL2, SCL236, SCL260, SCL3, SCLM1, SCLM2, SCLM236, SCLM260, SCLM3 Undercounter Refrigerators and Freezers TUC27R, TUC27F, TUC48R, TUC48F, TUC60R, TUC72R Worktop Refrigerators and Freezers with Backsplash TWT27R, TWT27F, TWT48R, TWT48F, TWT60R, TWT72R Please read the manual thoroughly prior to equipment set-up, operation and maintenance.
  • Page 2: Installation

    User Manual Installation Important!!! Please Read Before Installation • If the unit has recently been transported on its side, please let unit stand still for a minimum of 24 hours before plugging it in. • Make sure that the unit drops down to desired temperature before loading the unit with product. •...
  • Page 3 User Manual Temperature Controls • Refrigerant LED - Compressor is on • Fan LED - Fan is on • Defrost LED - Defrost cycle is running Functions Adjusting the Temperature Refrigerators are programmed to operate between 33 and 40 degrees Fahrenheit. Freezers are programmed to operate between -10 and +10 degrees Fahrenheit.
  • Page 4: Safety Warning

    User Manual Loading Product Before loading shelves, please be sure that all shelf clips are completely fastened in their correct locations. It is important that all shelves rest completely level before stocking your cabinet with product. In order to maintain correct air flow inside the unit, please be sure to leave two to four (2 to 4) inches of space between the back wall and stored product.
  • Page 5 User Manual Attention • To minimize shock and fire hazards, be sure not to overload outlet. Please designate one outlet for your unit. • Do not use extension cords. • Do not put your hands under the unit while it is being moved. •...
  • Page 6: Regular Maintenance

    User Manual Regular Maintenance WARNING: DISCONNECT POWER CORD BEFORE CLEANING ANY PARTS OF THE UNIT. Cleaning The Condenser Coil • For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and lint. • We recommend cleaning the condenser coil and fins at least once per month. •...
  • Page 7: Troubleshooting

    User Manual Troubleshooting Compressor Not Running Fuse blown or circuit breaker tripped. Replace fuse or reset circuit breaker. Power cord unplugged. Plug in power cord. Thermostat set too high. Set thermostat to lower temperature. Cabinet in defrost cycle. Wait for defrost cycle to finish. Condensing Units Run For Long Periods of Time.
  • Page 8: Warranty Information

    Next, call 1-800-678-5517. Be sure to have the model number, cabinet serial number, and service plate number available when contacting service technicians. This warranty does not apply to, and Avantco is not responsible for, any warranty claims made on products sold or used outside of the United States.

This manual is also suitable for:

Picl2Picl3Scl1Scl2Scl236Scl260 ... Show all

Table of Contents