Getting Started; Lcd Screen Guide - Bluetti EB70 User Manual

Just Power on

6. GETTING STARTED

The BLUETTI EB70 has separate AC and DC power buttons. Press either of
them to startup or shut down the specified port area.
(1) Turn on AC/DC: short press the AC/DC power button; both the indicator light
and LCD screen will be on, and the LCD screen will be off several seconds later.
(2) Turn off AC/DC: press and hold the AC/DC power button for several seconds,
and the indicator light and the LCD screen will be off.
(3) Setting Mode: press and hold both AC and DC power buttons at the same
time to turn it on, and the frequency indicator will flash.
(4) ECO Mode: under 'setting mode', press the DC power button to turn it on/off.
(5) Frequency Setting: under 'setting mode', press the AC power button to
switch the frequency of AC output ports to either 50HZ or 60HZ, depending on
your location.

7. LCD SCREEN GUIDE

a
b
d
a. ECO-Mode Icon
b. Battery Capacity
c. Input Power
c
g
e
f
d. Alert Icon for low Voltage
e. Alert Icon for Temperature
Anomaly
f. Output Power
- 05 -
h
g. Alert Icon for Overload
h. Alert Icon for Short Circuit