Table of Contents
Advertisement
5
Transport, packaging, storage
Delivery
Check the part washing unit for visible transport da-
mage after delivery. If you discover any damage, imme-
diately report it to the transport company or the dealer..
Transport
NOTE!
Observe the weight of the device during transport
and lifting. The transport and lifting equipment must
be able to pick up the load.
NOTE!
Protect the device from moisture.
The part washing unit must not be stacked on top of
each other. No other objects may be placed on the part
washing unit.
Tips and recommendations
For longer transports, ensure that the corrosion pro-
tection is intact or or renewed if necessary.
NOTE!
The device may never be stored or transported in a
horizontal position or filled!
Packaging
All used packaging materials and packaging aids are
recyclable and should be taken to a materials recycling
depot to be disposed of.
The delivery packaging is made of cardboard, so
please dispose carefully by having it chopped up and
given to the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). These materials should be
taken to a collection point for recyclable materials or to
the local waste disposal company.
Storage
The part washing unit must be thoroughly cleaned be-
fore storing in a dry, clean, and frost-free environment.
Never store the device filled.
TWG-Series | Version 1.01
6
Description of device
Illustrations in this operating manual may differ from the
original.
1
6
Fig. 3: Part Washing Unit TWG-Series
1 Protective cover
2 Cleaning gun
3 ON/OFF switch
4 Filling container
5 Substructure
6 Base plate
Transport, packaging, storage
2
3
4
5
7
Advertisement
Table of Contents
