Table of Contents
Advertisement
1
Introduction
You have made a good choice by purchasing the UNI-
CRAFT part washing unit.
Thoroughly read the operating instructions before commissio-
ning the part washing unit.
This informs about the proper commissioning, the inten-
ded use as well as the safe and efficient operation and
maintenance of the part washing unit.
The operating instructions are part of the part washing
unit. It must always be stored at the place of use of the
part washing unit. In addition, the local accident preven-
tion regulations and general safety regulations apply for
the area of application of the part washing unit.
Illustrations in this operating manual serve the general
understanding and may deviate from the actual design.
1.1 Copyright
The contents of this manual are protected by copyright.
Their use is permitted when using the machine. Any
further use is not permitted without the written permis-
sion of the manufacturer.
We hereby apply for trademark, patent and design
rights to protect our pro-ducts, if this is possible in indi-
vidual cases. We vigorously oppose any infringement of
our intellectual property.
1.2 Customer service
Please contact your dealer if you have questions conce-
ring your product or if you need technical advice. They
will help you with specialist information an expert ad-
vice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax:
0049 (0) 951 96555-111
Email:
service@stuermer-maschinen.de
Internet:
www.unicraft.de
Spare parts orders:
Fax:
0049 (0) 951 96555-119
Email:
ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and
knowledge gained from using the application-which
then could be shared and be valuable to develop our
products even further.
TWG-Series | Version 1.01
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised while taking applicable standards
and rules, the state-of-the-art technology and our long-
term knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of untrained staff
- unauthorised modifications
- technical changes
- Use of not allowed spare parts
The actual scope of delivery may deviate from the ex-
planations and presentations described here in case of
special models, when using additional ordering options
or due to latest technical modifications.
The obligations agreed in the delivery contract, the ge-
neral terms and conditions as well as the delivery condi-
tions of the manufacturer and the legal regulations valid
at the time of the conclusion of the contract apply.
2
Safety
This section provides an overview of all important safety
packages for the protection of operating personnel as
well as for safe and fault-free operation. Other task-
based safety notes are included in the paragraphs of
the individual phases of life.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are
high- lightet by symbols. The safety notes are intro-
duced by signal words which express the concern of
the risk. .
ATTENTION!
This combination of symbol and signal word indica-
tes a potentially hazardous situation which, if not
avoided, could result in property damage and env-
ironmental damage.
DANGER!
This combination of symbol and signal words indi-
cates an imminently dangerous situation which may
lead to death or severe injuries if they are not
avoided.
Introduction
3
Advertisement
Table of Contents
