Table of Contents
Advertisement
Electrician:
The electrician is due to their professional training,
knowledge and experience as well as knowledge of the
relevant standards and regulations able to work on
electrical systems and independently recognize and
avoid possible dangers. The electrician is specially trai-
ned for the work environment in which he works and
knows the relevant standards and regulations.
Qualified personnel:
Due to their professional training, knowledge and expe-
rience as well as their knowledge of relevant regulations
the specialist staff is able to perform the assigned tasks
and to recognise and avoid any possible dangers them-
selves.
Manufacturer:
Certain works may only be performed by specialist per-
sonnel of the manufacturer. Other personnel is not au-
thorized to perform these works. Please contact our cu-
stomer service for the execution of all arising work.
2.4 Personal protective equipment
The personal protective equipment serves to protect
persons against impairments of safety and health while
working. The staff member has to wear personal protec-
tive equipment while performing different tasks on and
with the machine which are indicated in the individual
paragraphs of these instructions.
The personal protective equipment is explained in the
following paragraph:
Ear protection
The ear protection protects against hearing damage
caused by noise.
Respiratory protection
The respiratory protection protects the respiratory
tract against the ingress of dust and small foreign
bodies.
Eye protection
The protective goggles protect the eyes from flying
parts and liquid splashes.
Protective gloves
The protective gloves protect the hands from sharp-
edged components as well as from friction, abrasi-
ons or deeper injuries.
TWG-Series | Version 1.01
Safety boots
The safety boots protect the feet against bruising, fal-
ling parts and slipping on slippery surfaces.
Protective clothing
The protective clothing is tight-fitting clothing with
low tear resistance.
2.5 Safety labels
Various safety labels are attached to the part washing
unit, which must be observed and followed.
The safety labels must not be removed. Damaged or mis-
sing safety labels can lead to incorrect handling, perso-
nal injury and damage to property. They must be re-
placed immediately.
If the safety labels are not immediately recognizable
and comprehendible, the part washing unit should be
taken out of service until new safety labels have been
made.
The following safety labels and symbols are attached:
Fig. 1: Safety labels on the part washing unit
2.6 Safety instructions
Use protective gloves!
DANGER!
Danger to life from electric current!
ALWAYS disconnect the part washing unit from the
power source before servicing or cleaning the unit.
- Keep the work area clean and tidy. Untidy work-
places and workbenches increase the risk of acci-
dents and injuries.
- Ensure adequate lighting. The lighting level should be
at least 300 lux.
- Do not smoke in the near of the part washing unit!
Safety
5
Advertisement
Table of Contents
