Download Print this page
Viessmann Vitotrol 200 RF Installation Instructions For Contractors

Viessmann Vitotrol 200 RF Installation Instructions For Contractors

Commissioning steps for wireless components

Advertisement

Quick Links

Installation instructions
for contractors
Commissioning steps for wireless components
Abridged version
Safety instructions
Please follow these safety instructions closely to prevent accidents and
material losses.
Installation, initial start-up, inspection,
maintenance and repairs must only be
carried out by a competent person (heat-
ing engineer/installation contractor).
Before working on the equipment/heat-
ing system, isolate the power supply
(e.g. by removing a separate mains fuse
or by means of a mains isolator) and
safeguard against unauthorised recon-
nection.
Usage information
Complete description of the commis-
sioning steps:
5602 138 GB
4/2011
VIESMANN
When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.
Repairing components which fulfil a
safety function can compromise the safe
operation of your heating system.
For replacements, use only original
spare parts supplied or approved by
Viessmann.
Installation and service instruc-
tions, wireless base station and
Vitotrol
Dispose after installation.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vitotrol 200 RF and is the answer not in the manual?

Questions and answers

Summary of Contents for Viessmann Vitotrol 200 RF

  • Page 1 For replacements, use only original safeguard against unauthorised recon- spare parts supplied or approved by nection. Viessmann. Usage information Complete description of the commis- Installation and service instruc- sioning steps: tions, wireless base station and Vitotrol Dispose after installation.
  • Page 2 Commissioning steps 1. Outside temperature sensor RF 1. Remove the outside temperature sen- sor from its packaging. 2. Position the outside temperature sen- sor so it is facing a light source, to allow the internal voltage supply to build up (approx. 15 min). 2.
  • Page 3 ■ Operation without wireless repeater: 4 s ■ Operation with wireless repeater: 3. On the Vitotrol 200 RF C press OK. 4. Enter the three-digit PIN of the wire- less base station (see above). 5. Assign a heating circuit.
  • Page 4 Viessmann Werke GmbH&Co KG Viessmann Limited D-35107 Allendorf Hortonwood 30, Telford Telephone: +49 6452 70-0 Shropshire, TF1 7YP, GB Fax: +49 6452 70-2780 Telephone: +44 1952 675000 www.viessmann.com Fax: +44 1952 675040 E-mail: info-uk@viessmann.com...