Midea TempMaker Series Technical Manual page 81

MCAC-UTSM-2014-03

The refrigerant pipe adapter is located inside the outdoor unit. So remove the right front board
first, and remove M5 screws.

When the pipe is connected from the front side, the pipe can be led out through the right front
board.

When welding the refrigerant pipe, in order to prevent internal oxidation of the pipe, nitrogen
R410A 380~415V 3Ph 50Hz TempMaker Series Split AC
MHA-150HWN1 + MOV-150HN1-R
MHA-192HWN1 + MOV-192HN1-R
MFA2-76HRN1 + MOV-76HN1-R
MFA2-96HRN1 + MOV-96HN1-R
80