Fujitsu ETERNUS DX60 S2 Hardware And Software Installation Manual page 7

Rack Mounting (2)

Push the M5 cage nut into the
2nd hole of the front rack pillar
above the base line of the
Controller Enclosure

Secure the left hand side slide
rail to the front pillar using the
M5 centering screw and M5
pan head screws
Hardware and Software Installation ETERNUS DX60 S2
Base line of the
Controller Enclosure
6 Copyright Fujitsu Technology Solutions, Release September 2011
M5 Cage nut
M5 Centering
screw (10 mm)
M5 Pan head
screw (10 mm)