AMG AMG2684 Instruction Manual

Eight channel video rx unit with bi-directional data

Advertisement

Quick Links

Eight Channel Video RX Unit with Bi-directional Data
REAR PANEL CONNECTIONS
OPTO
OUT
The AMG2684 is a standalone eight channel video receive unit designed to receive eight video
signals. It also provides two RS485/RS422.or RS232 bi-directional data channels. It is designed to be
powered from an AMG2002 power supply.
The AMG2684 is designed to operate with the AMG2683R or AMG2683 eight channel video
transmitter and data transceiver requiring two multimode fibres for operation of the video and bi-
directional data.
Index
Introduction .......................................................................................................... 2
Connections ......................................................................................................... 2
Indicators ........................................................................................................... 3
Physical Information ........................................................................................... 4
Configuration of the RS422/RS485 Data Channel ............................................ 4
Video Input Channel Configuration ................................................................... 4
SW1 Switch Settings ........................................................................................... 5
Removal from the Case ....................................................................................... 5
Maintenance ......................................................................................................... 6
AMG Systems Ltd. reserves the right to make changes to this document without
notice. The information herein is believed to be accurate. No responsibility is
assumed by AMG for its use.
VIDEO
CH 5
CH 1
CH 6
CH 2
CH 7
CH 3
DATA
CH 8
CH 4
CONNECTIONS
DATA
DATA
GND
5-8
1- 4
OUT-
RS 422
OR
OPTO
OUT+
RS 485
IN
IN-
POWER
POWER
IN+
5-8
1-4
GND
+12- 16 Volts dc
193mm between mounting slot centres
Unit Functional Schematic................................................................. 2
Optical System Connection ............................................................... 2
Video Input connection...................................................................... 2
Optical Connections .......................................................................... 2
Power Connections ........................................................................... 3
Data Connections.............................................................................. 3
Dimensions........................................................................................ 4
Mounting Details................................................................................ 4
........................................................................................................... 5
Instruction Manual
218mm
FRONT PANEL INDICATORS
AMG
TX
RX
VIDEO PRESENT
CH 1 CH2
O O
CH 3 CH4
*
O O
O O
TX
DATA PRESENT
2684
8 CHANNEL RX
+
2 BI-DIRECTIONAL
DATA
AMG2684
O O
CH 5 CH6
O O
CH 7 CH8
O O
O O
RX
TX
RX
CH1-4
CH5 -8
POWER
O
Page No.
Page 1 of 7
AMG2684 Instruction
Sheet D15700-00
109mm

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMG2684 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AMG AMG2684

  • Page 1 +12- 16 Volts dc 193mm between mounting slot centres The AMG2684 is a standalone eight channel video receive unit designed to receive eight video signals. It also provides two RS485/RS422.or RS232 bi-directional data channels. It is designed to be powered from an AMG2002 power supply.
  • Page 2 Outgoing Fibre (from output of 2683) (to input of 2683) Optical System Connection The AMG2684 is connected as illustrated below when used with an AMG2683 8 channel transmitter. REAR PANEL CONNECTIONS FRONT PANEL INDICATORS REAR PANEL CONNECTIONS FRONT PANEL INDICATORS...
  • Page 3  – P in 1 – Data In Pin 1 – Data In AMG Systems Ltd. reserves the right to make changes to this document without Page 3 of 7 AMG2684 Instruction notice. The information herein is believed to be accurate. No responsibility is Sheet D15700-00 assumed by AMG for its use.
  • Page 4 – video signal present on video CH7 input BNC Red/Green - Channel present , no video AMG Systems Ltd. reserves the right to make changes to this document without Page 4 of 7 AMG2684 Instruction notice. The information herein is believed to be accurate. No responsibility is Sheet D15700-00 assumed by AMG for its use.
  • Page 5 In order to ensure that a tri-state condition is detected by the AMG2700 equipment, then these resistors should have a value above 1kohm. AMG Systems Ltd. reserves the right to make changes to this document without Page 5 of 7 AMG2684 Instruction notice.
  • Page 6 SW1 and SW2 can be found on the bottom right hand corner of each board and are labelled, close to the rear panel. The switch position are labelled on the switch, switch position 1 is always the furthest AMG Systems Ltd. reserves the right to make changes to this document without Page 6 of 7 AMG2684 Instruction notice.
  • Page 7 Maintenance There are no user serviceable parts within the AMG2600 products. In case of problem or failure contact your local support centre or AMG Systems Ltd, Technical Support Department on tel. +44 (0) 1767 600777. See unit data sheet for full specification.

Table of Contents