Encore ENHWI-N User Manual page 35

Virtual Server Settings
Items
Enable this Rule
Application Select
WAN Port
Protocol
LAN Server IP
LAN Port
Action
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Virtual Server Mapping List
Lists the Virtual Server Settings you have added before. Click on the list to change
configuration, or the Delete button to delete the list.
Information
Mark to enable the configuration, and clear to
disable.
Select an application for your demand.
Fill in the port number of WAN.
Select the protocol type of TCP, UDP or Both
Fill in the IP of your LAN Server.
Fill in the port number of LAN.
After configure the above settings, click Add to add
a new list in the following IP Filter Rule List. The
Change button can be used to change the
configuration.
31