Table of Contents
Advertisement
Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30
8 Disassembly and assembly / 8.5 Removing the cartridge group
8.5 Removing the cartridge group
If provided
Control dimension u [mm]
© Copyright 2020 . All rights reserved.
CAUTION
Locked safety segments (76080) during disassembly
Observe the maximum tightening torque for the nuts (90458) so as not
to shear off the threaded studs of the safety segments (76080).
Fit four nuts (74027) complete with washers (74018), equally spaced
u
around circumference, and tighten.
Remove insulation.
u
Take nuts (90458) out of toolbox and screw onto threaded studs of
u
safety segments (76080) on compressor casing internal part (76000).
Tighten nuts (90458) to specified tightening torque (see Table).
u
Tightening torque for nut (90458)
TPL69-A
20 Nm
Note the control dimension (u).
u
Dimension [mm]
u
The compressor casing internal part has now been detached from the
compressor casing external part (74000) and can be removed.
HZTL2481_EN
TPL73-A
30 Nm
TPL69-A
TPL73-A
17.8
18.6
TPL77-A
TPL77-A
19.0
Rev.D
March 2020
Advertisement
Table of Contents
