Table of Contents
Advertisement
Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30
8 Disassembly and assembly / 8.3 Removing and fitting filter silencer
or air suction branch
8.3 Removing and fitting filter silencer or air
Install air suction branch.
© Copyright 2020 . All rights reserved.
suction branch
Disconnect all air lines / ducts in accordance with engine builder's in-
u
structions.
Remove insulation where necessary.
u
Loop lifting gear around air suction branch. Pass lifting gear through
u
possibly provided holes in ribs to improve stability.
Unscrew nuts (74027) and remove together with washers (74018).
u
Remove air suction branch and set down to one side.
u
Install air suction branch in reverse order.
u
HZTL2481_EN
Rev.D
March 2020
Advertisement
Table of Contents
