Lan Settings (Static / Dhcp) - EnGenius ECB-8610 User Manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS

3.4 LAN Settings (Static / DHCP)

IP Address Mode: Select the Static or DHCP radio button. If you select DHCP radio
button, you are not required to enter the rest of the fields, as the IP address will be
provided to the device by the AP or DHCP server. If you select the Static radio
button, you must enter the IP address, subnet mask, and default gateway.
IP Address: Enter an IP address for this device.
Subnet Mask: Enter the subnet mask for this IP address.
Default Gateway: Enter the IP address of the default gateway.
Click on the Save Settings button once you have modified the settings.
Note: If you change the IP address here, you may need to adjust your PC's network
settings to access the network again.
Click on the LAN link on the navigation drop-
down menu. This feature allows you to
configure the LAN interface using a static IP
address or as a DHCP client. This IP address is
also used to access the web-based interface.
Version 1.0
26