Wireless 11A & 11B/G Configuration; Infrastructure / Ad-Hoc Mode - EnGenius ECB-8610 User Manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS
3.3.2 Wireless 11a & 11b/g Configuration
Click on the Wireless_Setting link under the Wireless menu. The first part of this
page allows you to save the configuration. Click on the Save Settings button once
you have modified the settings.

3.3.3 Infrastructure / Ad-hoc Mode

Click on the Wireless_Setting link under the Wireless menu. The second part of
this page allows you to configure the device in infrastructure or ad-hoc mode.
Wireless Mode: Select the Infrastructure or Ad-Hoc radio button. Infrastructure is a
point-to-multipoint (PtMp) topology where as Adhoc is a point-to-point topology (PtP).
Wireless Network Name: The SSID is a unique named shared amongst all the
points of the wireless network. The SSID must be identical on all points of the
wireless network and cannot exceed 32 characters.
Channel: Select a channel from the drop-down list. The channels available are
based on the country's regulation. When selecting Infrastructure mode, a channel is
Version 1.0
22